Practice guideline for the performance of breast ultrasound elastography
Article information
Abstract
Ultrasound (US) elastography is a valuable imaging technique for tissue characterization. Two main types of elastography, strain and shear-wave, are commonly used to image breast tissue. The use of elastography is expected to increase, particularly with the increased use of US for breast screening. Recently, the US elastographic features of breast masses have been incorporated into the 2nd edition of the Breast Imaging Reporting and Data System (BI-RADS) US lexicon as associated findings. This review suggests practical guidelines for breast US elastography in consensus with the Korean Breast Elastography Study Group, which was formed in August 2013 to perform a multicenter prospective study on the use of elastography for US breast screening. This article is focused on the role of elastography in combination with B-mode US for the evaluation of breast masses. Practical tips for adequate data acquisition and the interpretation of elastography results are also presented.
Introduction
Ultrasound (US) elastography is an imaging technique that can visualize tissue elasticity (stiffness) in vivo. The first practical equipment was released in 2003, and many manufacturers offer various kinds of commercial systems that are based on the following two US elastography techniques: strain and shear-wave elastography (SWE). The most common type of strain elastography (SE) displays relative tissue displacement under compression, whereas SWE displays an image of the shear-wave speedusing acoustic radiation force excitation.
US elastography is used to perform breast mass evaluation and characterization, and many studies have reported that it can increase the specificity of conventional B-mode US in differentiating benign from malignant breast masses [1-4]. Recently, the US elastographic features of breast masses have been incorporated into the 2nd edition of the Breast Imaging Reporting and Data System (BI-RADS) US lexicon as associated findings [5]; hence, the use of elastography is expected to increase. In addition, the correlations between the elasticity and histological features of breast cancers are also being studied [6-8]. This article is focused on the role of elastography combined with B-mode US for evaluating breast masses. Practical guidelines for performing US elastography on breast tissue, including tips for adequate data acquisition and the interpretation of elastography results, are presented here based on the consensus of the Korean Breast Elastography Study Group.
Interpretation of US Elastography
Strain Elastography
When the breast tissue is pressed by the transducer, a hard lesion undergoes less strain than does the surrounding soft background. The relative strain in the tissue is displayed in a black-and-white (bright, soft; dark, hard) or color-coded (red, soft; blue, hard) image. In SE, the lesion size or area on the elastogram is compared to the corresponding lesion on the B-mode US image, as malignant lesions appear larger on elastograms than on B-mode US images. Itoh et al. [1] proposed the 5-point scale elasticity score indicating an increasing probability of malignancy (Fig. 1A) that is most commonly used for SE. A cut-off point between the elasticity scores of 3 and 4 was initially suggested to differentiate benign from malignant breast lesions. However, a cut-off point between the elasticity scores of 1 and 2 or 2 and 3 was used in several studies and achieved better diagnostic performance with less interobserver variability [2,4]. Recently, we classified elasticity scores into three categories: a score of 1 (even strain across the entire lesion) as negative, scores of 2 and 3 (uneven strain in the lesion) as equivocal, and scores of 4 and 5 (no strain across the entire lesion) as positive results [3,9]. A specific bull’s eye artifact on black-and-white images or an aliasing artifact that appears as a blue-green-red (BGR) pattern on colorcoded images (Fig. 1B) can be observed in simple cysts [9-11].
Shear-Wave Elastography
Using SWE, transversely oriented shear waves are generated by acoustic radiation force, and these waves propagate faster in hard tissue than soft tissue. A color-coded image displaying the shear wave velocity (m/sec) or elasticity (kilopascals, kPa) for each pixel in the region of interest (ROI) is acquired. Generally, a color scale ranging from 0 (dark blue, soft) to +180 kPa (red, hard) is used for breast lesions. A variety of qualitative and quantitative parameters of SWE have been studied so far [12-20], and the most useful SWE feature is the color assessment of the maximum elasticity, which is correlated with the maximum elasticity value (kPa) (Fig. 2A). The positive predictive value for malignancy increases with increasing elasticity, from 0.4% for dark blue to 81.8% for red colors [16]. The maximum elasticity colors on SWE can be classified into three categories: dark blue and light blue colors (representing soft elasticity) as negative, green and orange colors (intermediate elasticity) as equivocal, and red colors (hard elasticity) as positive [16,21]. Signal-void areas that are not color-coded even in the penetration mode can appear in simple cysts (Fig. 2B) or in very hard masses with dense collagen deposition, as shear waves cannot propagate through them [22].
Application of US Elastographic Results: Combination with B-mode US Findings
Elastographic results can be applied to evaluate breast masses in combination with B-mode US findings in the four ways discussed below.
Biopsy Decision to Short-term Follow-up
BI-RADS category 4a (low suspicion of malignancy) masses with soft elasticity can be downgraded to category 3 (probably benign), reducing unnecessary biopsies without a significant loss of sensitivity [2,4,16,23]. When downgrading category 4a masses to category 3, two different strategies (aggressive and conservative strategies) can be applied according to the management policy preferences of the radiologist. An aggressive strategy can be used to achieve the highest specificity, whereas a conservative strategy is intended to prevent a false negative. A score of 1 or 2 on SE and a maximum elasticity color of ≤ light blue or a maximum elasticity of ≤ 80 kPa on SWE was used for the aggressive strategy, and a score of 1 on SE and a maximum elasticity color of dark blue or a maximum elasticity of ≤30 kPa on SWE was used for the conservative strategy [16]. Several studies are currently underway under the hypothesis that specific criteria might be needed for each clinical setting, such as screening US or combined examination with Doppler US [24]. A multicenter prospective study is currently underway by the Korean Breast Elastography Study Group on whether US elastography can increase the positive predictive value of screening breast US using either SE or SWE.
Short-term Follow-up to Routine Follow-up
BI-RADS category 3 is defined as a breast mass with an oval, circumscribed shape and a margin that presents the typical appearance of fibroadenoma and that has a malignancy rate of less than 2%. On screening US, approximately 20% of women presented BI-RADS category 3 lesions, leading to unnecessary shortterm follow-up in most cases [25]. BI-RADS category 3 masses with very soft elasticity (score 1 on SE or a maximum elasticity color of dark blue or a maximum elasticity of ≤20 kPa on SWE) can safely be downgraded to category 2 (benign), thereby reducing unnecessary short-term follow-up [26,27]. A multicenter prospective study is currently underway by the Korean Breast Elastography Study Group on whether US elastography can increase the positive predictive value of screening breast US using either SE or SWE.
Short-term Follow-up to Biopsy
Well-circumscribed cancers can be misclassified as BI-RADS category 3 (probably benign lesions) on B-mode US, leading to a delay in diagnosis. Because these cancers are usually high-grade, it has been proposed that hard elasticity (a score of 4 or 5 on SE and a maximum elasticity color of red or a maximum elasticity of ≥160 kPa on SWE) could be used to detect cancers among BI-RADS category 3 masses [6-8]. However, upgrading category 3 masses might be controversial, especially in a screening setting, because the malignancy rate of category 3 masses is known to be very low [25], and malignancies detected by screening US are known to be small in size, indicating relatively low elasticity [28-30]. We hope that the multicenter prospective study by the Korean Breast Elastography Study Group can offer further evidence on this point.
Increase in Diagnostic Confidence
For malignant breast masses with low suspicious findings on B-mode US (BI-RADS category 4a), hard elasticity can increase the suspicion of malignancy (BI-RADS category 4b or higher), although the management remains unaffected. In addition, fat lobules or benign cysts, which can mimic solid breast masses, can be identified by their markedly soft elasticity, similar to that of the adjacent subcutaneous fat or BGR pattern on elastography, respectively.
The guidelines for combining B-mode US and elastographic results suggested by the Korean Breast Elastography Study Group are summarized in Fig. 3. Positive or negative elastographic results acquired on either SE or SWE can influence the BI-RADS category of a breast mass. For breast masses that present equivocal elastographic results, B-mode US findings should be considered preferentially.
Practical Tips for Data Acquisition and Interpretation of US Elastography
Although elastography is useful during the evaluation of breast masses, a substantial amount of interobserver variability occurs during data acquisition and interpretation [31,32]. The reliability of the imaging technique depends on the training and experience of the operator. Practical tips for adequate data acquisition and interpretation of US elastography results are summarized in Tables 1 and 2.
For adequate data acquisition, the probe should be placed vertically on the skin to correctly compress the tissue using light pressure. SWE is known to be highly reproducible and less dependent on the operator [33-35]; however, technical errors, such as probe compression or movement, can also lead to inaccurate results. Generous amounts of contact jelly should be used and the range of ROI should be adjusted to exclude the skin and chest wall layers to reduce artifacts.
Even when elastography is performed using an appropriate technique, the image quality can be affected by intrinsic factors, such as the lesion size, lesion depth, or breast thickness. On SE, a smaller lesion size, shallower lesion depth, and reduced breast thickness at the site of the lesion were significantly associated with a higher image quality [14]. On SWE, a larger lesion size and increased breast thickness were correlated with a higher falsepositive rate, and a smaller size and deeper lesion were correlated with a higher false-negative rate [36]. Good quality elastographic images can be defined by a high signal-to-noise ratio in the ROI (Fig. 4). High quality images exhibited better diagnostic performance in differentiating benign from malignant breast masses, whereas poor quality images offered less diagnostic information [14,21,37]. Therefore, it is important to consider the image quality during decision making when deciding whether to apply the elastographic result to management.
Conclusion
US elastography provides valuable information regarding tissue elasticity during the assessment of breast masses and can increase the specificity of conventional B-mode US in differentiating benign from malignant breast masses. However, training and education are important for adequate data acquisition and interpretation of elastography results, as well as for deciding whether to apply the elastographic results to management. Our guidelines would be helpful for applying breast US elastography in daily practice.
Notes
No potential conflict of interest relevant to this article was repoted.